The latest charcoal making machines come with carbonization technology that converts biomass waste materials, municipal solid waste, and sewage sludge into charcoal. This type of charcoal can successfully replace coal used in power generation, thus reducing the world’s carbon footprint significantly. Get the charcoal manufacturing machine.

Most modern charcoal making machines work on the principle of high-temperature pyrolysis. This method forces the raw materials to generate a variety of reactions inside the carbonizing furnace. The reactions result in producing new energy that later makes chunks of charcoal. Some of the machines with advanced technology find their way into coconut shell charcoal making plants and rice husk charcoal making plants.

Modern charcoal making machines are more eco-friendly than the traditional carbonization process. They achieve higher efficiency, higher quality, and higher output than their traditional counterparts. See some options https://bestonmachinery.com/charcoal-making-machine/palm-kernel-shell/.

Charcoal carbonization process

Making carbon from waste materials is no joke. Here’s the step by step method that will amaze you how modern technology can help in reducing the world’s overall carbon footprint:

1. Some of the raw materials used in a charcoal manufacturing machine are biomass waste, coconut shell, wood, straw, rice husk, sawdust, palm shell, and peanut shell.

2. The wood chips charcoal making machine requires that the raw materials’ moisture should be below 20%. On the other hand, the size of the raw materials should be at least 30 mm. Otherwise, the machine can’t process the raw materials properly. Usually, carbon manufacturers install a pretreatment device that segregates different types of raw materials, making it easier for the carbonization equipment to mix the materials easily.

3. The raw materials enter the carbonization furnace after preprocessing. Next, the machine uses a few traditional fuels, such as natural gas, wood, or coal to heat the furnace for at least 30 minutes. The carbonization furnace starts generating combustible gas once the furnace reaches its desired temperature. Usually, it takes 15 to 20 minutes for the furnace to process the raw materials at a temperature between 650 and 780o C.

4. Discharging the hot coal right after processing is dangerous. Manufacturers use a cooling system to significantly reduce the charcoal’s temperature to 30o C. Hot charcoal can cause life-threatening accidents if it comes in contact with oxygen. That’s why charcoal making machines come with a cooling system to avoid risks of fire in the plant. Some of the advanced machines have a full-sealed chamber, thus making the process safer.

5. The combustible gas in the carbonization process goes through a purification stage where a spray dusting system removes sulfur components from it. These sulfur components later go into the heat furnace to make charcoal. Therefore, there is no waste left from the waste materials that you put into the carbonization chamber in the first step. See some options https://bestonmachinery.com/.

6. Apart from the sulfur components, the condenser system also liquefies combustible gas into wood vinegar and tar.

With so many benefits, it is easy to understand why there is a worldwide demand for a charcoal manufacturing machine. It has the potential to reduce pollution and make the world a greener place for everyone.